Description:
<jats:p>A novel method for quasi-continuous tar monitoring in hot syngas from biomass gasification is reported. A very small syngas stream is extracted from the gasifier output, and the oxygen demand for tar combustion is determined by a well-defined dosage of synthetic air. Assuming the total oxidation of all of the combustible components at the Pt-electrode of a lambda-probe, the difference of the residual oxygen concentrations from successive operations with and without tar condensation represents the oxygen demand. From experiments in the laboratory with H2/N2/naphthalene model syngas, the linear sensitivity and a lower detection limit of about 70 ± 5 mg/m3 was estimated, and a very good long-term stability can be expected. This extremely sensitive and robust monitoring concept was evaluated further by the extraction of a small, constant flow of hot syngas as a sample (9 L/h) using a Laval nozzle combined with a metallic filter (a sintered metal plate (pore diameter 10 µm)) and a gas pump (in the cold zone). The first tests in the laboratory of this setup—which is appropriate for field applications—confirmed the excellent analysis results. However, the field tests concerning the monitoring of the tar in syngas from a woodchip-fueled gasifier demonstrated that the determination of the oxygen demand by the successive estimation of the oxygen concentration with/without tar trapping is not possible with enough accuracy due to continuous variation of the syngas composition. A method is proposed for how this constraint can be overcome.</jats:p>