Beschreibung:
systems have been in use for a long time and have well-established technologies for low-temperature thermal applications. Use of new glazing materials, absorber plate designs, selective coatings, and advanced working fluids, thermal conversion efficiencies of these devices can be further improved. Design modification always comes under top priority because it brings auxiliary changes that further modify the system's overall efficiency. Increasing energy demand puts extra attention on the researchers to develop solar thermal energy-based systems. The presented experimental analysis is based on the design modification of the collector absorber plate to modify the contact area between the absorber plate and collector tubes. We performed a comparative performance of the circular absorber surface and the trapezoidal surface of contact with absorber tubes. The following results indicate that the trapezoidal absorber surface serves better over circular and plat absorber surfaces.Thermal efficiency increases by 8.74% and 12.85% for absorber plates' circular and trapezoidal corrugated surfaces. Exergy efficiency is improved by 16.88, 23.31%, and the overall heat loss coefficient decreases by 7.49 and 8.72% for circular and trapezoidal corrugated surfaces, respectively. The collector's heat removal factor is also significantly higher for trapezoidal corrugated absorber plate than the normal collector absorber surface