Sie können Bookmarks mittels Listen verwalten, loggen Sie sich dafür bitte in Ihr SLUB Benutzerkonto ein.
Medientyp:
E-Artikel
Titel:
Influence of the weld pool geometry on solidification cracking in partial penetration high power laser beam welding
Beteiligte:
Bakir, Nasim
[VerfasserIn];
Üstündag, Ömer
[VerfasserIn];
Gumenyuk, Andrey
[VerfasserIn];
Rethmeier, Michael
[VerfasserIn]
Erschienen:
BAM-Publica - Publikationsserver der Bundesanstalt für Materialforschung und -prüfung (BAM), 2022
Sprache:
Englisch
DOI:
https://doi.org/10.1016/j.procir.2022.08.174
Entstehung:
Anmerkungen:
Diese Datenquelle enthält auch Bestandsnachweise, die nicht zu einem Volltext führen.
Beschreibung:
Solidification cracking is still a serious problem in laser beam welding, especially in the welding of thick-walled plates. The influence of weld pool geometry on solidification cracking in partial penetration welding of thick plates is investigated within scope of this study. Therefore, a specific experimental setup of steel and quartz glass in butt configuration and on the side with high-speed camera were used to record the weld pool shape. In addition, the influence of laser inclination angle on the weld pool geometry and on solidification crack formation was investigated. The results show a bulge in the weld pool root, which is separated from an upper region by a necking region. This leads to a case where there are three different longitudinal region lengths with different solidification zones. This temporal sequence of solidification strongly promotes the formation of solidification cracks in the weld root.