Marso, M.
[Verfasser:in];
Mikulics, Martin
[Verfasser:in];
Winden, W.
[Verfasser:in];
Arango, Y. C.
[Verfasser:in];
Schäfer, Anna
[Verfasser:in];
Sofer, Z.
[Verfasser:in];
Grützmacher, Detlev
[Verfasser:in];
Hardtdegen, Hilde
[Verfasser:in]
Sie können Bookmarks mittels Listen verwalten, loggen Sie sich dafür bitte in Ihr SLUB Benutzerkonto ein.
Medientyp:
Elektronischer Konferenzbericht
Titel:
InGaN nano-LEDs for energy saving optoelectronics
Beteiligte:
Marso, M.
[Verfasser:in];
Mikulics, Martin
[Verfasser:in];
Winden, W.
[Verfasser:in];
Arango, Y. C.
[Verfasser:in];
Schäfer, Anna
[Verfasser:in];
Sofer, Z.
[Verfasser:in];
Grützmacher, Detlev
[Verfasser:in];
Hardtdegen, Hilde
[Verfasser:in]
Anmerkungen:
Diese Datenquelle enthält auch Bestandsnachweise, die nicht zu einem Volltext führen.
Beschreibung:
Vertically integrated III-nitride nano-LEDs designed for operation in thetelecommunication-wavelength range were fabricated and tested in the (p-GaN/InGaN/n-GaN/sapphire) material system. We found that the band edgeluminescence energy of the nano-LEDs could be engineered by their size andby the strain interaction with the masked SiO2/GaN substrates; it dependslinearly on the structure size. The results of reliability measurements provethat our technological process is perfectly suited for long-term operation ofthe LEDs without any indication of degradation effects. The presentedtechnology shows strong potential for future low energy consumptionoptoelectronics.1. IntroductionSingle photon emitters based on InGaN nano-LEDs (light emitting diodes) operating atroom temperature are the key to enable future low energy consumption, highly secure andultrafast optoelectronics [1]. There is an especially strong need to develop such emittingsources at the wavelengths used for telecommunication, which are fully compatible withestablished communication systems. Major challenges are the whole nano-LED integrationtechnology and especially the contacts. The top contact should be highly electricallyconductive, highly optically transparent, thermally and mechanically stable and simple tofabricate.2. Device fabricationFirst, we started with the site-controlled growth of InGaN nanostructures via catalystfreeselective-area MOVPE [2]. The manufacturing process was optimized with respect to themask pattern in order to be able to fabricate individually addressable InGaN nanopyramidbased nano-LEDs. The starting point for growth were uniform and smooth n-GaN layers of atleast 1.3μm on sapphire (c-plane) masked with SiO2. Afterwards a hexagonally arranged arrayof openings was defined by electron beam lithography followed by reactive ion etching (RIE)with trifluoromethane (CHF3) gas. The separation distance was fixed to 3μm and the bottomhole diameter was varied from 20 nm to 100 nm. All samples were grown by MOVPE in anAIX 200/4 RF-S ...