Beschreibung:
<jats:title>Abstract</jats:title>
<jats:p>Considering the importance of turbulence model and wall treatment to steam ejector simulation, the influence of five wall treatment methods on numerical results was studied based on the realizable k-ε turbulence model (RKE). Combined with experimental data and SST turbulence model, the prediction of complex flow phenomena inside the ejector, including shock wave and reflux, by different wall treatment methods is discussed. The results show that under the numerical simulation conditions, the enhanced wall treatment method (EWT) combined with the RKE model can better predict the injection coefficient of the steam ejector, and the relative error compared with the experimental data is 5.3%. The standard wall function method (STWF) ignores the influence of the viscous bottom layer, resulting in inaccurate simulation of the internal flow phenomenon of the injector, and the injection coefficient calculated by the simulation is 10.2% higher than the experimental value. The results of the non-equilibrium wall function (NWF) method are relatively indifferent to the experimental values, and are not recommended when simulating steam ejectors.</jats:p>