Beschreibung:
AbstractHigh‐strength SiC joints were successfully obtained by electric current field‐assisted sintering technique at a low temperature of 1400°C using a Pr coating (100 nm) as the initial joining filler. A Pr3Si2C2 transient phase was formed in situ by the interfacial reaction, while the eutectic reaction between Pr3Si2C2 and SiC at ∼1150°C resulted in the formation of a liquid phase. The liquid phase promoted the atomic diffusion at the interface and improved consolidation of the newly precipitated nano‐sized SiC with the SiC matrix. This led to the formation of partially seamless joints of SiC. When the thickness of the joining layer decreased from 1 to 100 nm, the content of the residual Pr‐O phase at the interface decreased, while the bending strength of the joints increased. A sound SiC joint with a bending strength of 227 ± 12 MPa was obtained at such a low temperature as 1400°C when a 100 nm Pr coating was applied.