Beschreibung:
<p>In the present article an attempt is made to compare multi-carrier and single carrier modulation schemes for wireless communication systems with the utilization of fast Fourier transform (FFT) and its inverse in both cases. With the assumption that in OFDM (orthogonal frequency division multiplexing), the inverse FFT transforms the complex amplitudes of the individual sub-carriers at the transmitter into time domain, the inverse operation is carried out at the receiver. In case of single carrier modulation, the FFT and its inverse are used at the input and output of the frequency domain equalizer in the receiver. Different single carrier and multi-carrier transmission systems are simulated with time-variant transfer functions measured with a wideband channel sounder. In case of OFDM, the individual sub-carriers are modulated with fixed and adaptive signal alphabets. Furthermore, a frequency-independent as well as the optimum power distribution are used. Single carrier modulation uses a single carrier, instead of the hundreds or thousands typically used in OFDM, so the peak-to-average transmitted power ratio for single carrier modulated signals is smaller. This in turn means that a SC system requires a smaller linear range to support a given average power. This enables the use of cheaper power amplifier as compared to OFDM system.</p>